Forum for owners of vehicles powered by the Toyota 4AC or related engines
 
HomeRegisterLog in

Share | 
 

 installed weber which vac line do i use

View previous topic View next topic Go down 
AuthorMessage
handbrake



Car : ae82
Posts : 3
Join date : 2012-04-09
Location : brisbane

PostSubject: installed weber which vac line do i use    Sat Apr 14, 2012 3:42 am

hey i put a weber on my 4ac ae82. all is good but which vac line do i use dizzy has two lines n carb only has one. also does the vac advance work on suction from manifold?? cause at an idle at has suction then as u rev it losses it suction, n as for the vac line coming from carby it has none at idle n then picks up suction as u rev. which way does the adv work????? scratch scratch scratch
Back to top Go down
 
installed weber which vac line do i use
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Vent/Overflow line on IMS Tank Cap?
» FS: Weber 32/36 dgv
» LS1 Fuel Line Install
» Wtb, 4ac Header, MSD Coil, 6a, Weber adapter plate?
» Fluorocarbon line

Permissions in this forum:You cannot reply to topics in this forum
4AC Powered :: General Discussion-
Jump to: