http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/-t1.htm Suspension, steering, brake, wheel, and tire related discussions Fri, 20 Nov 2009 16:43:14 GMT 10 http://i87.servimg.com/u/f87/13/77/65/79/4ac_po12.jpg http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/-t1.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/high-performance-grip-tires-t344.htm EvolutionGTS I'm currently looking to upgrade my tire setup, I'm currently running 175/70R13, what setup would give me better grip and traction. My car has also been lowered, so I'm a bit worried about rubbing. Even with my stock tires, I had to roll the fenders just so it wont rub, so I'm a bit worried about clearances. Suspension and Unsprung Fri, 20 Nov 2009 16:43:14 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/high-performance-grip-tires-t344.htm#2567 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/high-performance-grip-tires-t344.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/loud-noise-t44.htm 84AE86 When I picked up my 84 corolla the previous owner chopped the springs to lower the car so I replaced those with lowering springs but every time I do a really sharp turn the car makes a loud ping sound coming for the front of the car ( sounds like if the compressed and the decompressed really fast and then hit something) its really had to explain but it only does it when I turn shape like when backing out of a drive way or parking spot. Any ideals? Suspension and Unsprung Fri, 08 May 2009 01:18:14 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/loud-noise-t44.htm#200 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/loud-noise-t44.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/what-wheels-are-you-running-t110.htm NP75 You can tell us what wheels you have on your car in this thread. I have 6 spoke wheels from an early 80's Datsun 280Z. They are from the junkyard so they are cheap, and reasonably light as well. They also have low backspacing which helps me clear the helper spring and adjustable lower spring perch on the front suspension. The front struts are set up for lots of suspension travel, and the perch is quite low on the strut which is what causes problems. I also have to use a 0.25" spacer ... Suspension and Unsprung Fri, 12 Jun 2009 05:04:22 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/what-wheels-are-you-running-t110.htm#609 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/what-wheels-are-you-running-t110.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/need-help-t292.htm carcandymotorsports
email me or pm me if you have one to sell.


]]> Suspension and Unsprung Thu, 05 Nov 2009 16:46:20 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/need-help-t292.htm#2088 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/need-help-t292.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/weight-reduction-t288.htm EvolutionGTS I was wondering what kind of things I can safely remove from my car. Its a AE82 sedan, but 4AC powered =) . The spare tire and jack are already removed in favor of "fix a flat". Thanks. Suspension and Unsprung Wed, 04 Nov 2009 08:23:13 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/weight-reduction-t288.htm#2064 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/weight-reduction-t288.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/rear-brake-disc-conversion-t272.htm inagawa how do you convert the rear drums to disc, and what parts do you need for it? Suspension and Unsprung Tue, 27 Oct 2009 04:45:01 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/rear-brake-disc-conversion-t272.htm#1956 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/rear-brake-disc-conversion-t272.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/why-are-my-rear-drums-locking-up-t222.htm thecarguy i just bought my ae86 corolla sr5. its a automatic unfortunately. my overdrive doesn't work. when flushing my transmission i had all for wheels in the air. then i noticed that my driver side tire wasn't rotating at all. i blocked the passenger wheel the the driver side stated to spin on and off with a horrible sound of brake drag. i tried to adjusting them but it only got worse. help Suspension and Unsprung Wed, 16 Sep 2009 00:42:18 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/why-are-my-rear-drums-locking-up-t222.htm#1531 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/why-are-my-rear-drums-locking-up-t222.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/s13-wheels-t221.htm driftcorp86
would spacers do the job?]]> Suspension and Unsprung Sun, 13 Sep 2009 09:20:22 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/s13-wheels-t221.htm#1507 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/s13-wheels-t221.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/spring-rates-t217.htm Hachigo_moe Heres my situation im trying to build my corolla drift, and im having trouble with spring rates. I was wondering wat would be best for a corolla with 4A-C that has about 90hp. Here are some options i found on the net 7kg/5kg(391,277.5), 6kg/4kg(335,220), 8kg/6kg (447,335) Suspension and Unsprung Wed, 09 Sep 2009 08:04:10 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/spring-rates-t217.htm#1473 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/spring-rates-t217.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/wanna-buy-springs-which-to-get-t176.htm AE82 I wanna make my car handle better, to much body roll and the COG is way to high! I have a 1984 Toyota Corrola 4 door Sedan. I heard good springs on stock struts is a stupid idea? I think it will offer better handling to a point. I don't have the money for full blown coil over shocks that cost $900+! I heard about coil clamps? Reduces the hieght by 2inches adds better handling but not sure about them...(people say they work really well) Suspension and Unsprung Thu, 06 Aug 2009 06:42:26 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/wanna-buy-springs-which-to-get-t176.htm#1132 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/wanna-buy-springs-which-to-get-t176.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/gts-sway-bar-on-a-ae82-fwd-t213.htm EvolutionGTS Title... Would a GTS sway bar fit on a AE82 FWD? Suspension and Unsprung Fri, 04 Sep 2009 07:15:53 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/gts-sway-bar-on-a-ae82-fwd-t213.htm#1448 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/gts-sway-bar-on-a-ae82-fwd-t213.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/camber-kits-t105.htm Kojaki my car is dropped on cut springs and has been cornering like ass. i couldnt figure it out y. then i check my tires and theryre ate out on the inside from too much camber. ive been reading, and i find that most of the 86 suspension is identical to a 83 corolla. do i look for a camber kit for a 86? do any of you guys no a good place for camber kits for our cars? thanks Suspension and Unsprung Mon, 08 Jun 2009 04:31:13 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/camber-kits-t105.htm#581 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/camber-kits-t105.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/longer-wheel-studs-t200.htm red rolla I'm planning on using some wheel studs that I got from NAPA for $1.60 each. Supposedly, they are for a Lexus LS400. I measured the stock wheel studs at about 36mm and the NAPA ones at about 44mm. I figure these will work nicely if I use a small spacer. Maybe this info will help someone. Also, I know there are other options out there and was wondering what people here have used. Wheel Studs: Wheel Studs in rear axle: Suspension and Unsprung Wed, 26 Aug 2009 22:38:42 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/longer-wheel-studs-t200.htm#1326 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/longer-wheel-studs-t200.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/height-adjustable-rear-springs-t183.htm Atomic Sheep Does anybody know of any height adjustable rear springs that you can purchase? Like the ones on the rear suspension of the GReddy/Megan coilover kits. Suspension and Unsprung Sat, 08 Aug 2009 06:36:46 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/height-adjustable-rear-springs-t183.htm#1157 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/height-adjustable-rear-springs-t183.htm http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/shocks-all-around-t74.htm dilutedspine I was wondering what shock / struts and springs you guys have experience with. I've never been able to find much info on the subject especially since I have leaf springs in the rear. I wanna keep the leave springs but my rear driver side shock has definitively taken a dump so I figure since the thing rolls like a jet fighter thru turns I might as well replace all the suspension once I get her back on the road. Just wanted some suggestions. Suspension and Unsprung Sun, 17 May 2009 03:10:18 GMT http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/shocks-all-around-t74.htm#355 http://4ac-powered.forumotion.com/suspension-and-unsprung-f4/shocks-all-around-t74.htm